![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
home electrician
May. 7th, 2026 09:01 pmLast night while stumbling to the bathroom I knocked down a framed drawing from the wall while fumbling for the bathroom door. In the morning, B. discovered that the falling frame had knocked the toggle off the ancient light switch. This was the switch that controlled the overhead lights for the bedroom as well as the outlets where we plug in the fans that keep the room cool in hot summer nights, nights which are expected to resume this week. So we needed the toggle fixed, and fast.
I could have called in an electrician for much money, but there was nothing else for him to do right now in terms of home repairs. I decided to see if I could do it myself. I bought a new light switch from the local hardware store and gathered the tools. Not knowing which breaker controlled the room, I turned off the master breaker for the house.
Detaching the old switch from the wall and unconnecting the wires was one job; stripping the wire that needed it, connecting them to the new switch, and installing it in the wall was quite another. B. had found a useful illustrated article (not a video, blessed be) on how to replace a light switch. I found I already knew most of it, which was encouraging regarding my competence to do the job, but it had some useful information, such as that it doesn't matter which connection you attach each of the two hot wires to, which was relieving because the layout of the old switch and the new switch was different, so if it had mattered I wouldn't have known how to map the old one on to the new one. Unless the article had explained it, which it probably would have.
The big problem, not addressed by the article, was attaching the plate to the wall. The long screws could go through holes in the switch but couldn't fit into anything in the wall, so how was the whole (plate + switch) going to attach to the wall? I suspect that the old plate was original to the house and wasn't screwed in to the wall at all, but had been stuck on the wall paint when it was still wet; some prying had been necessary for detaching it. So I fixed the plate to the wall with a couple of pieces of transparent duct tape. One more thing to alert the landlord to whenever we do move out of here.
I could have called in an electrician for much money, but there was nothing else for him to do right now in terms of home repairs. I decided to see if I could do it myself. I bought a new light switch from the local hardware store and gathered the tools. Not knowing which breaker controlled the room, I turned off the master breaker for the house.
Detaching the old switch from the wall and unconnecting the wires was one job; stripping the wire that needed it, connecting them to the new switch, and installing it in the wall was quite another. B. had found a useful illustrated article (not a video, blessed be) on how to replace a light switch. I found I already knew most of it, which was encouraging regarding my competence to do the job, but it had some useful information, such as that it doesn't matter which connection you attach each of the two hot wires to, which was relieving because the layout of the old switch and the new switch was different, so if it had mattered I wouldn't have known how to map the old one on to the new one. Unless the article had explained it, which it probably would have.
The big problem, not addressed by the article, was attaching the plate to the wall. The long screws could go through holes in the switch but couldn't fit into anything in the wall, so how was the whole (plate + switch) going to attach to the wall? I suspect that the old plate was original to the house and wasn't screwed in to the wall at all, but had been stuck on the wall paint when it was still wet; some prying had been necessary for detaching it. So I fixed the plate to the wall with a couple of pieces of transparent duct tape. One more thing to alert the landlord to whenever we do move out of here.
